Remote Control

PROGRAM A REMOTE USING THE LEARN BUTTON

1 Press and release the Learn button on the garage

2 Within 30 seconds, press and hold

door opener. The Learn indicator light will glow

the button on the remote control.

steadily for 30 seconds.

 

 

Learn

 

 

Indicator

 

 

 

 

 

Light

 

 

 

 

 

Yellow

 

 

Learn

 

 

Button

 

 

 

 

3Release the button when the garage door opener light blinks. It has learned the code. If light bulbs are not installed, two clicks will be heard.

When replacing the light lens cover, ensure the antenna wires are hanging straight down.

To Erase the Memory

ERASE ALL REMOTE CONTROLS AND KEYLESS ENTRIES

1 Press and hold the learn button on garage door opener until the learn LED goes out (approximately 6 seconds). All remote control and keyless entry codes are now erased.

Reprogram any accessory you wish to use.

ERASE ALL DEVICES

1 Press and hold the learn button on garage door opener until the learn LED goes out (approximately 6 seconds).

2 Immediately press and hold the learn button again until the learn LED goes out. All codes are now erased.

Reprogram any accessory you wish to use.

40