4 Install the belt

4.1Pull the belt around the pulley and toward the trolley. The ribbed side must contact the pulley.

4.2Hook the trolley connector into the retaining slot on the trolley as shown.

4.3With the trolley against the screwdriver, dispense the remainder of the belt along the rail length toward the motor unit and around the sprocket. The sprocket teeth must engage the belt.

4.4Check to make sure the belt is not twisted. Connect the trolley threaded shaft with the master link (H5).

•Push pins of master link bar through holes in end of belt and trolley threaded shaft.

•Push master link cap over pins and past pin notches.

•Slide clip-on spring over cap and onto pin notches until both pins are securely locked in place.

4.5Insert the trolley threaded shaft through the hole in the trolley.

 

 

HARDWARE

 

 

H1

 

H5

 

 

Threaded Shaft

 

 

Master Link

 

 

 

 

 

 

 

 

 

 

 

 

 

H5

H1 H5

9