Christie Digital Systems DHD800 Input Selection, Computer Input Source Selection, RGB PC analog

Input Selection

Computer Input Source Selection

Menu Operation

When Selecting the INPUT 1 with DVI/D-sub 15 terminals

1	Press the MENU button to display the On-Screen Menu.
	Use the Point  buttons to move the red frame pointer

to the INPUT Menu icon.

2Use the Point 54 buttons to move the red arrow pointer to the desired input and then press the SELECT button. Then you can switch to the desired input.

3Press the select button again. The Source Select Menu appears.

4Use the Point 54 buttons to select the desired source and then press the SELECT button.

RGB (PC analog)

When your computer is connected to the INPUT 1 (ANALOG) terminal, select RGB (PC analog).

INPUT MENU

Input Menu icon

Move the pointer (red arrow) to Input 1 and press the SELECT button.

Input 1

Source Select Menu

Move the pointer (red arrow) to the desired source and press the SELECT button.

RGB (PC digital)

When your computer is connected to INPUT 1 (DIGITAL) terminal, select RGB (PC digital).

When Selecting the INPUT 2 with 5-BNC/Video/S-video terminals

INPUT MENU

RGB

When your computer is connected to the INPUT 2 (5 BNC INPUT JACKS) terminal, select RGB.

Input Menu icon

Move the pointer (red arrow) to Input 2 and press the SELECT button.

Input 2

Source Select Menu

Move the pointer (red arrow) to RGB and press the SELECT button.

Note:

•When a slot is empty, the input is displayed in grayout.

DHD800 User Manual	33
020-000244-01 Rev.1 (08-2010)