Christie Digital Systems DHD800 Picture Image, Image Adjustment, Color Selection Mode, Contrast

Picture Image

Image Adjustment

1Press the MENU button to display the On-Screen Menu. Use the Point  buttons to move the red frame pointer to the Image Adjust Menu icon.

2Use the Point 54 buttons to move the red frame pointer to the desired item and then press the SELECT button

to display the adjustment dialog box. Use the Point  buttons to adjust the setting value.

Contrast

Press the Point  button to decrease contrast; press the Point

button to increase the contrast (from 0 to 63).

Brightness

Press the Point  button to decrease the brightness; press the Point  button to increase the brightness (from 0 to 63).

Color =

Press the Point  button to decrease the intensity of the color; press the Point  button to increase the intensity of the color (from 0 to 63).

Tint =

Press the Point  buttons to adjust the tint value to obtain proper color balance (from 0 to 63).

Color Management

The Color Management function can be used to adjust the LEVEL, PHASE, and GAMMA of the selected display colors (except for black, white, and gray) on the screen and replace these colors with other colors if required.

You can store up to eight (8) color management data.

1Use the Point 54 buttons to move the red frame pointer to Color Management, and then press the SELECT button. The projected image freezes, and the COLOR MANAGEMENT POINTER appears.

2Use the Point 544 buttons to move the pointer to the spot where you want to adjust the color and then press the SELECT button. The COLOR SELECTION window appears, and the color in the center of the pointer is selected and you can adjust the color.

3Use the Point 544 buttons to adjust the LEVEL and PHASE of the color, and then press the SELECT button

to confirm the setting. Then use the Point 54 buttons to adjust the GAMMA for the color and press the SELECT button to accept the setting. After adjusting, press the SELECT button to go to the COLOR MANAGEMENT LIST.

COLOR SELECTION MODE

LIST

Go to the COLOR MANAGEMENT LIST.

IMAGE ADJUST MENU

Image Adjust Menu icon

Move the red frame pointer to the desired item and then press SELECT button.

Use the Point  buttons to adjust the setting value.

POINTER MODE

COLOR MANAGEMENT

POINTER

Note:

=Displayed in grayout in the computer Input. •Tint cannot be selected when the video

system is PAL, SECAM, PAL-M, or PAL-N (p.42).

•Color management is displayed in grayout when there is no signal.

46	DHD800 User Manual
	020-000244-01 Rev.1 (08-2010)