Manuals / Christie Digital Systems / Computer Equipment / Projector

Christie Digital Systems DHD800 Video Input, Video System Selection, Video Jack or S-Video Jack

Models: DHD800

1 96

Download 96 pages 21.42 Kb

Page 44

Video Input

Video Input

Video System Selection

1Press the MENU button to display the On-Screen Menu. Use the Point buttons to move the red frame pointer to the AV System Menu icon.

2Use the Point 54 buttons to move the red arrow pointer to the desired system and then press the SELECT button.

Video Jack or S-Video Jack

Auto

The projector automatically detects an incoming video system, and adjusts itself to optimize its performance.

PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N

If the projector cannot reproduce proper video image, select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV System Menu icon

The selected system is displayed

Move the pointer to the desired system and press the SELECT button.

Y, Pb/Cb, Pr/Cr Jacks

Auto

The projector automatically detects an incoming video signal, and adjusts itself to optimize its performance.

When the Video System is 1035i or 1080i, select the system manually.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, select a specific component video signal format from among 480i, 575i, 480p, 575p, 720p, 1035i, 1080p, and 1080i.

Note:

•The AV System menu cannot be selected when selecting RGB(Scart).

AV SYSTEM MENU (COMPONENT VIDEO)

AV System Menu icon

The selected system is displayed.

Move the pointer to the desired system and press the SELECT button.

	42	DHD800 User Manual
	42	020-000244-01 Rev.1 (08-2010)
		020-000244-01 Rev.1 (08-2010)

Image 44

Christie Digital Systems DHD800 Video Input, Video System Selection, Video Jack or S-Video Jack, Y, Pb/Cb, Pr/Cr Jacks

Contents

U S E R M A N U A L DHD800Page User’s Manual = Lens not includedFeatures and Design Table of Contents Safety Precaution To The OwnerRISK OF ELECTRIC SHOCK DO NOT OPEN FOR EU USERSSafety Instructions NOTE FOR CUSTOMERS IN THE USSafety Instructions Air CirculationInstalling the Projector in Proper Directions Positioning PrecautionsCAUTION ON CEILING MOUNTING Cautious use of equipment with laser technologyCAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR Moving the ProjectorSafety Instructions AC Power Cord Requirement ComplianceFederal Communications Commission Notice AC Power Cord for the United States and CanadaBack Part Names and FunctionsFront Terminals and Connectors Part Names and FunctionsPart Names and Functions Side Control and IndicatorsSide Control Indicators POWER indicatorLAMP Indicator WARNING TEMP. indicatorRemote Control To ensure safe operation, observe the following precautionsDo not bend, drop, or expose the remote control to moisture or heat Part Names and FunctionsRemote Control Battery Installation Remote Control Receivers and Operating RangeWired Remote Control Part Names and FunctionsRemote Control Code Part Names and FunctionsInstallation Lens InstallationPicture Level and Pitch Adjustment Positioning ProjectorInstallation Lens Shift AdjustmentWhen the lens is shifted to top When the lens is shifted to bottomTerminals of Projector InstallationNOTES ON ORDERING OR USING OPTIONAL INTERFACE BOARD Replacement of TerminalConnecting to Computer InstallationCables used for connection Terminals of the projectorConnecting to Video Equipment InstallationMonitor Out Signal Table Cables used for connectionAttaching the Cable Tie InstallationTo loosen the cable tie DHD800 User ManualConnecting the AC Power Cord AC Outlet sideProjector side Fixing BracketBasic Operation Turning On the ProjectorBasic Operation Turning Off the ProjectorHow to Operate the On-Screen Menu Remote ControlBasic Operation On-Screen MenuMenu Bar For Computer SourceFor Video Source PC Adjust MenuOperating with Projector Control Zoom AdjustmentFocus Adjustment Lens Shift AdjustmentInformation Menu Basic OperationInformation Operating with Remote Control Remote ControlBasic Operation AUTO PC buttonP-TIMER button Remote ControlBasic Operation SHUTTER buttonInput Selection InputRemote Control Side ControlInput Selection Computer Input Source SelectionWhen Selecting the INPUT 1 with DVI/D-sub 15 terminals When Selecting the INPUT 2 with 5-BNC/Video/S-video terminalsVideo Input Source Selection When Selecting the INPUT 1 with DVI/D-sub 15 terminalsWhen Selecting the INPUT 2 with 5-BNC/Video/S-video terminals Input SelectionComputer Input Computer System SelectionAuto ModeAuto PC Adjustment Computer InputRemote Control Side ControlManual PC Adjustment PC ADJUST MENUCurrent mode Current modeReset Mode freeTo clear the adjusted data To store the adjusted dataImage Level Selection Remote ControlComputer Input Standard Real Dynamic Image1Screen Size Adjustment Computer InputNormal ZoomReset Digital zoom +/- cannot be selected when Full or True is selectedComputer Input For zooming in and out the imagesVideo Input Video System SelectionCOMPONENT VIDEO SIGNAL FORMAT The AV System menu cannot be selected when selecting RGBScartVideo Input Remote ControlImage Level Selection Standard Cinema Dynamic Image1Screen Size Adjustment When no signal is detected, “Normal” isThe adjustable range for Scale H/V and Position H/V is limited depending on the input signalReset Video InputKeystone CeilingImage Adjustment Picture ImageCOLOR SELECTION MODE IMAGE ADJUST MENUPicture Image COLOR SELECTION MODE continuedCOLOR SELECTION MODE LIST MODEReset Picture ImageWhite balance Red/Green/Blue Offset Red/Green/BlueSetting SettingSETTING MENU Language LanguageSetting Lamp mode“User” cannot be selected when the image is not captured BackgroundSetting To store the adjusted dataon the input signals and the selected input terminals. Refer When the input signals is/are incompatible, X mark willSetting Edge blendingColor matching Edge blendingSetting DynamicBlackAdvanced color matching Fig.1Setting HDMI setupHDMI setup A signal from a computer can be captured up to 1920 x 1080 dotsSetting Change the Logo PIN code lock settingChange the Logo PIN code lock setting Enter a Logo PIN codeSetting When a filter cartridge supplied has been installed in the projectorRemote control To change the code for the remote controlSetting Power managementPower management Factory default is “Ready 5 min.”Setting Security Key lockPIN code lock SecuritySetting Change the PIN code lock settingProjector ID Enter a PIN codeSetting ShutterProtection EffectSetting Use the Point buttons, select an item of Off/Low/Mid/ HighSetting When a filter cartridge supplied has been installed in the projectorWhen a filter cartridge supplied has been installed in the projector Filter counterSetting Factory defaultFactory default Test patternMaintenance and Care Filter InstructionsMaintenance and Care L Model No. of your projector L Replacement Filter Cartridge Type NoResetting the Filter Counter Resetting the Scroll CounterMaintenance and Care Filter counterLamp Management Maintenance and CareLamp 1/2 Replace Indicators Lamp Mode ChangeoverLamp Replacement Maintenance and CareNOTES ON LAMP REPLACEMENT IndicatorsLAMP HANDLING PRECAUTIONS Maintenance and CareORDER REPLACEMENT LAMP Replacement Lamp Type NoOptional Color Wheel Installation Maintenance and CareSCREW LAMP COVER COLOR WHEELS SCREWSMaintenance and Care Cleaning the Projection LensCleaning the Projector Cabinet Warning Indicators Maintenance and CareIndicators IndicatorsTroubleshooting ProblemSolutions AppendixAppendix Appendix Menu Tree Image AdjustThe Menu display varies depending on the input signal AppendixPC Adjust The Menu display varies depending on the input signalAppendix SystemSetting been installed in the projectorDisplayed in grayout when the filter cartridge supplied has not AppendixIndicators and Projector Condition IndicatorsProjector Condition AppendixIndicators Projector ConditionAppendix The projector is detecting abnormal conditionIndicators Projector ConditionAppendix Fig.2, Fig.3 and Fig.4 icon will not appear when= = = = = = = Compatible Computer SpecificationsAppendix RESOLUTION RESOLUTIONRESOLUTION Specifications are subject to change without noticeList of Picture in Picture Supported Signal Format for Optional BoardAppendix Technical Specifications Signal CompatibilityPower Remote ControlOptional Parts AppendixConfigurations of Terminals AppendixInput OutputPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No AppendixDimensions AppendixUnit inch mm DHD800 User ManualEdge blending How to adjust multiple screensAppendix Appendix Color matchingPage Page Corporate offices Worldwide offices