Setting
Advanced
color matching . . . . .Set to ‘On‘ to activate the ‘Advanced color matching’. When it is set to ‘Off‘, all items except for ’Test pattern’ are displayed in grayout and cannot be adjusted.
Measured . . . . . . . .When using the color wheel set optimized for high brightness, the chromatic coordinate (X,Y) and the brightness (L) of Red, Green, Blue, Half white, and White are displayed (Fig.1). When using the color wheel set optimized for rich color reproduction, the chromatic coordinate (X,Y) and the brightness
(L)of Red, Green, Blue, and White are displayed (Fig.2).
Information: Select ‘Information’ and press the SELECT button to display the information dialog box (Fig.3). Measured information display can be used to confirm the current setup condition of the Image select menu and the color wheels.
Target . . . . . . . . . . .Adjust the chromatic coordinate (X,Y) and the gain value (g) of Red, Green, Blue, Cyan, Magenta, Yellow, and White. Use the Point 544 buttons to move the red frame pointer to an item of which you want to adjust the value and then press the SELECT button. Use the Point 54 buttons to adjust the value. To move to the next digit, use the Point buttons. Press the SELECT button to set the value.
Auto test pattern . . .Select ‘On‘ to display a suitable pattern when setting items.
Factory default . . . .Select ‘Factory default’ and press the SELECT button. Then ‘Return to factory default of Color matching?‘ message appears. To reset the selected Measured value and Target value, select [Yes]. Then, the confirmation box appears. Press the SELECT button at [Yes] again.
Reset . . . . . . . . . . . .Select ‘Reset’ and press the SELECT button. Then the confirmation message appears. Press the SELECT button at [Yes] to reset to the previously stored values.
Store . . . . . . . . . . . .Select ‘Store’ and press the SELECT button. Then the Confirmation box appears. To store adjusted data, select [Yes].
Test pattern . . . . . . .When using the color wheel set optimized for high brightness, use the Point 54 buttons to select from (Measured) Red/Green/Blue/Half white/White/(Target) Red/Green/Blue/ Cyan/ Magenta/Yellow/White.
When using the color wheel set optimized for rich color reproduction, use the Point 54 buttons to select from (Measured) Red/Green/ Blue/White/(Target) Red/Green/Blue/Cyan/ Magenta/Yellow/White.
Menu off . . . . . . . . Close the menu temporarily. Quit . . . . . . . . . . . . .Exit the Color matching menu.
DynamicBlack
DynamicBlackTM improves the black level of the projector. Black level is the darkest part of a picture and varies between viewing devices and environments. Set DynamicBlack Off/Low/High.
Advanced color matching
|
| Close this |
Fig.1 | For high brightness color wheel | dialog box. |
|
Fig.2 For rich color reproduction color wheel
Fig.3 Measured information dialog box
Note:
•In the Measured information dialog box, ‘Standard’ indicates all the Image select menus other than ‘Dynamic’.
DHD800 User Manual | 53 | |
|
