Cisco Systems 10720, 12000 Network

Chapter14 Routing

BGP Status

14-30

Cisco 12000/10720 v3.2 Router Manager User Guide

OL-6690-01

Local Autonomous System—The id of the BGP process running in the device. If

the value is 0 it means no BGP process is running on the device.

BGP Identifier—It is the Router Identifier for the BGP speaking router. By

default, BGP Identifier is set to IP address of the loopback interface if it is

configured otherwise it is the highest IP address configured for a physical

interface on that router.

BGP Version—It displays the supported BGP version.

BGP Synchronization—It displays whether BGP synchronization with IGP is

enabled or disabled.

BGP Auto-Summary—It displays whether Automatic network number

summarization for BGP is enabled or disabled.

BGP Log Neighbor-Changes—It displays whether logging of BGP neighbor

resets is enabled or disabled.

Default-Metric—It displays the default-metric value set for redistributed routes.

BGP Default IPV4-Unicast—It displays whether the IP version 4 (IPv4) unicast

for peers is enabled or disabled on the router.

Network

The Network tab displays a single area, BGP Network Information

Neighbor IP Address—The IP address of the peer where the path information was

learnt.

Network Mask—Length in bits of the IP address prefix in the Network Layer

Reachability Information field

Network Address—An IP address prefix in the Network Layer Reachability

Information field. This object is an IP address containing the prefix with the

length specified by the Network Mask attribute. Any bits beyond the length

specified by Network Mask attribute are zeroed.