Chapter14 Routing
BGP Configuration
14-6
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01
Step2 Choose the chassis from the left side of the window.
BGP Details Tab—Detailed Description
The BGP-Details tab displays two areas: BGP General and BGP Information

BGP General

Local Autonomous System—The id of the BGP process running in the device. If
the value is 0 it means no BGP process is running on the device.
Actions
Enable—The Enable action button is active when there is no BGP running on the
device. Clicking Enable action button opens the BGP Enable window through
which the user can create a new BGP process in the device. For more details on
enabling BGP on a chassis, see “Enabling BGP on a Chassis” section on page 7.
Disable—The Disable action button is active when there is a BGP process running
in the device. Clicking Disable action button removes the BGP process running in
the device. For more details on disabling BGP, see “Disabling BGP on a Chassis”
section on page 11.

BGP Information

BGP Identifier—It is the Router Identifier for the BGP speaking router. By
default, BGP Identifier is set to IP address of the loopback interface if it is
configured otherwise it is the highest IP address configured for a physical
interface on that router.
BGP Version— It displays the supported BGP version.
BGP Synchronization—It displays whether BGP synchronization with IGP is
enabled or disabled.
BGP Auto-Summary—It displays whether Automatic network number
summarization for BGP is enabled or disabled.