14-9
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01
Chapter14 Routing
BGP Configuration
Enable BGP Window—Detailed Description
Local Autonomous System—The id of the BGP process to be created on the
device.
Action
Enable BGP—Clicking on the Enable BGP button creates the BGP process on the
device.
Modifying BGP on a Chassis
The BGP Modify Window allows the user to modify the BGP Configurations on
the device. To modify a BGP process, proceed as follows:
Step1 Open the BGP Configuration window. See “Viewing the BGP Details Tab on the
BGP Configuration Window” section on page14-4 for further details.
Step2 Choose a chassis from the left side of the window.
Note You can choose multiple chassis (from the chassis list) which allows you
to launch the BGP Modify window for the selected chassis.
Step3 Click on the Modify button. The BGP Modify window appears.
Note The Modify button is active only when there is BGP running on the
device.