14-55
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01
Chapter14 Routing
BGP Address Family Configuration
BGP Address Family-Neighbor Configuration—Detailed Description
The Configure Neighbor window displays a list of Address Families and an area:
Add/Remove Neighbor.
Address Family List—Displays a list of the address families.
Add/Remove Neighbor
Address Family—Unique identifier of the address family type.
VRF Name—Identifier of the VRF Name if the address family type is IPv4 VRF
Neighbor IP Address—This is used to configure the IP address of the neighbor
router for the address family.
Remote AS—This is used to configure the neighbor router’s autonomous system
number. This value can range from1 to 65535.
Note This attribute is configurable only for the ipv4 unicast and ipv4 vrf address
families.
Send Community—This is used to select the community attribute sent in the route
updates to a peer. The default is not to send community attribute in route updates.
The available options are: both, extended and standard.
Update Source—To enable or disable BGP sessions to use a specific operational
interface for TCP connections. The available options are: No and Yes.
Note The Update Source command in the device can specify any interface (physical,
virtual, loopback) to be used as source IP address of the BGP session with the
neighbor; but in the EM only the loopback interface can be specified. This
attribute is configurable only for the ipv4 unicast and ipv4 vrf address families.