14-7
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01
Chapter14 Routing
BGP Configuration
BGP Log Neighbor-Changes—It displays whether logging of BGP neighbor
resets is enabled or disabled.
Default-Metric—It displays the default-metric value set for redistributed routes.
BGP Default IPV4-Unicast—It displays whether the IP version 4 (IPv4) unicast
for peers is enabled or disabled on the router.
Action
Modify—The Modify action button is active only when there is BGP running in
the device. Clicking the Modify action button opens the BGP Modify window
through which the user can modify the General BGP parameters. For more details
on modifying BGP, see “Modifying BGP on a Chassis” section on page9.
Enabling BGP on a Chassis
The Enable BGP window allows the user to enable a BGP process on the device.
To enable a BGP process, proceed as follows:
Step1 Open the BGP Configuration window. See “Viewing the BGP Details Tab on the
BGP Configuration Window” section on page14-4 for further details.
Step2 Choose a chassis from the left side of the window.
Note You can choose multiple chassis (from the chassis list) which allows you
to launch the Enable BGP window for the selected chassis.
Step3 Click on the Enable button. The Enable BGP window appears.
Note The Enable button is active only when there is no BGP running on the
device.