Chapter14 Routing
BGP Address-Family Status
14-66
Cisco 12000/10720 v3.2 Router Manager User Guide
OL-6690-01
BGP General
Local Autonomous System—The id of the BGP process running in the device. If
the value is 0 it means no BGP process is running on the device.
BGP Address Family Information
Address Family—Unique identifier of the address family type.
VRF Name—Identifier of the VRF Name if the address family type is ipv4 vrf.
Auto Summary—Displays whether the automatic network number summarization
is enabled/disabled for the address family.
Synchronization—Displays whether the BGP synchronization with IGP is
enabled/disabled for the address family.
Default Metric—Displays the default metric value set for redistributed routes of
the address family.
AF-NetworkThe AF—Network tab displays a single area: Network Information.
Network Information
Network Address—An IP address prefix in the Network Layer Reachability
Information field. This object is an IP address containing the prefix with the
length specified by the Prefix Len attribute. Any bits beyond the length specified
by Network Mask attribute are zeroed.
Prefix Len—Length in bits of the IP address prefix in the network layer
reachability information field.
Path Origin—The ultimate origin of the network path information.
Next Hop Ip Address—The address of the border router that should be used for
the destination network.P
Metric—This metric is used to discriminate between multiple exit points to an
adjacent autonomous number. A value of -1 indicates the absence of this attribute.
Degree of Preference—The originating BGP4 speaker's degree of preference for
an advertised route. A value of -1 indicates the absence of this attribute.
Weightage—Specifies the BGP weight for the routing table.