Cisco Systems 520 manual Router Installation, Typical Installation

C H A P T E R 4

Router Installation

This chapter provides the procedures for cabling and installing a Cisco Secure Router 520 Series router. The chapter contains the following sections:

•Typical Installation, page 4-1

•Connecting a Server, PC, or Workstation, page 4-6

•Connecting an External Ethernet Switch (Optional), page 4-7

•Connecting a Broadband Modem, page 4-8

•Connecting an ADSL Line—ADSLoPOTS Port, page 4-9

•Connecting an ADSL Line—ADSLoISDN Port, page 4-10

•Connecting the AC Adapter, page 4-12

•Connecting a Terminal or PC to the Console Port, page 4-14

•Connecting an Asynchronous Modem to the Console Port, page 4-14

•Verifying Router Operation, page 4-16

•What to Do Next, page 4-16

Note Before you start the cabling procedure, do the following:

•Read the safety warnings and guidelines in the “Safety Warnings and Guidelines” section on page 2-1.

•Mount the router as described in Chapter 3, “Router Mounting Procedures.”

Typical Installation

The following sections describe and depict a typical installation for each of the

Cisco Secure Router 520 Series routers:

•Installing the Cisco Secure Router 520 Ethernet-to-Ethernet Router, page 4-2

•Installing the Cisco Secure Router 520 ADSL-over-POTS Router, page 4-3

•Installing the Cisco Secure Router 520 ADSL-over-ISDN Router, page 4-5

Cisco Secure Router 520 Series Hardware Installation Guide

OL-12892-01 4-1