Cisco Systems 520 Installing the Cisco Secure Router 520 ADSL-over-ISDN Router

4-5

Cisco Secure Router 520 Series Hardware Installation Guide

OL-12892-01

Chapter 4 Router Installation

Typical Installation

Installing the Cisco Secure Router 520 ADSL-over-ISDN Router

Figure 4-3 shows a typical installation for the Cisco Secure Router 520 ADSL-over-ISDN router. The

figure shows the front panel of the router.

Figure 4-3 Typical Installation of a Cisco Secure Router 520 ADSL-over-ISDN Router

Cisco Secure Router 500 Series

211483

1Ethernet connection to an external switch 2Ethernet connection to a PC

3ADSL-over-ISDN connection 4Console port

To install the Cisco Secure Router 520 ADSL-over-ISDN router, follow these steps:

Step 1 If you have a wireless router, first connect the radio antenna to the router. See the “Connecting a Radio

Antenna to a Wireless Router” section on page 3-1.

Step 2 Connect the server, PC, or workstation to the router. See the “Connecting a Server, PC, or Workstation”

section on page 4-6.

Step 3 (Optional) If you need to connect more than four PCs, connect an external Ethernet switch to the router’s

built-in switch. See the “Connecting an External Ethernet Switch (Optional)” section on page 4-7.

Step 4 Connect the ADSL line. See the “Connecting an ADSL Line—ADSLoISDN Port” section on page 4-10.

Step 5 Connect the AC adapter to the router. See the “Connecting the AC Adapter” section on page 4-12.