Cisco Systems 6901 manual Performing Final End User Configuration Steps, Click Device Associations

Appendix D Basic Phone Administration Steps

Performing Final End User Configuration Steps

Example: Using the John Doe extension in the example above, if you specify a mask of 408902XXXX, an external call from extension 6640 displays a caller ID number of 4089026640.

Note This setting applies only to the current device unless you check the check box at right (Update Shared Device Settings) and click the Propagate Selected button. (The check box at right displays only if other devices share this directory number.)

g.Click Save.

h.Click Associate End Users at the bottom of the window to associate a user to the line being configured. Use the Find button in conjunction with the Search fields to locate the user, then check the box next to the user’s name, then click Add Selected. The user’s name and user ID should now appear in the “Users Associated With Line” pane of the Directory Number Configuration window.

i.Click Save. The user is now associated with Line 1 on the phone.

j.If your phone has a second line, configure Line 2.

k.Associate the user with the device:

–Choose User Management > End User.

–Use the search boxes and the Find button to locate the user you have added (i.e. doe for the last name).

–Click on the user ID (that is, johndoe). The End User Configuration window appears.

–Click Device Associations.

–Use the Search fields and the Find button to locate the device with which you want to associate to the user. Select the device, then click Save Selected/Changes. The user is now associated with the device.

–Click the Go button next to the Back to User Related link in the upper-right corner of the screen.

l.Proceed to Performing Final End User Configuration Steps, page D-6.

Performing Final End User Configuration Steps

If you are not already on the End User Configuration page, choose User Management > End User to perform some final configuration tasks. Use the Search fields and the Find button to locate the user (i.e. John Doe), then click on the user ID to get to the End User Configuration window for the user.

In the End User configuration window, do the following:

Procedure

Step 1 In the Directory Number Associations pane of the screen, set the primary extension from the drop-down list.

Step 2 In the Mobility Information pane, check the Enable Mobility box.

Step 3 In the Permissions Information pane, use the User Group buttons to add this user to any user groups. For example, you may want to add the user to a group that has been defined as a “Standard CCM End User Group.”

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

D-6 OL-23874-01