Cisco Systems 6901 manual Overview, Audience, Organization, Chapter Description

Preface

Overview

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) provides the information you need to understand, install, configure, manage, and troubleshoot the phones on a Voice-over-IP (VoIP) network.

Because of the complexity of an IP telephony network, this guide does not provide complete and detailed information for procedures that you need to perform in Cisco Unified Communications Manager or other network devices. See the “Related Documentation” section on page viii.

Audience

Network engineers, system administrators, or telecom engineers should review this guide to learn the steps required to properly set up the Cisco Unified IP Phone on the network.

The tasks described are administration-level tasks and are not intended for end-users of the phones. Many of the tasks involve configuring network settings and affect the phone’s ability to function in the network.

Because of the close interaction between the Cisco Unified IP Phone and Cisco Unified Communications Manager, many of the tasks in this manual require familiarity with Cisco Unified Communications Manager.

Organization

This manual is organized as follows:

Chapter	Description
Chapter 1, “An Overview of the Cisco	Provides a conceptual overview and description of the Cisco
Unified IP Phone”	Unified IP Phone.
Chapter 2, “Preparing to Install the Cisco Unified IP	Describes how the Cisco Unified IP Phone interacts with other key
Phone on Your Network”	IP telephony components, and provides an overview of the tasks
	required prior to installation.
Chapter 3, “Setting Up the Cisco Unified IP Phone”	Describes how to properly and safely install and configure the Cisco
	Unified IP Phone on your network.

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)

OL-23874-01 vii