Cisco Systems 6901 manual Services Guide, Monitoring, Administration Guide, Cisco Unified IP

Chapter 5 Configuring Features, Templates, Services, and Users

Telephony Features Available for the Cisco Unified IP Phone

Table 5-1		Telephony Features for the Cisco Unified IP Phone (continued)
	Feature		Description	Configuration Reference
	Redial		Allows users to call the most recently dialed phone	Requires no configuration.
			number by pressing the Redial button.
	Remote Port		Allows the administrator to configure the speed	To configure the parameter in the Cisco
	Configuration		and duplex function of the phone Ethernet ports	Unified CM Administration application,
			remotely by using Cisco Unified CM	choose Device > Phone, select the appropriate
			Administration. This enhances the performance for	IP phone, and scroll to the Product Specific
			large deployments with specific port settings.	Configuration Layout pane (Switch Port
			Note If the ports are configured for Remote Port	Remote Configuration or PC Port Remote
			Configuration in Cisco Unified CM, the	Configuration).
			data cannot be changed on the phone.	To configure the setting on multiple phones
				simultaneously, configure the remote
				configuration in either Enterprise Phone
				Configuration (System > Enterprise Phone
				Configuration) or Common Phone Profile
				Configuration (Device > Device Settings >
				Common Phone Profile.
				(Switch Port Remote Configuration or PC Port
				Remote Configuration)
	Shared Line		Allows a user to have multiple phones that share	For more information, go to the
			the same phone number or allows a user to share a	“Understanding Directory Numbers” chapter
			phone number with a coworker.	in the Cisco Unified Communications
				Manager System Guide.
	Monitoring and		Allows a supervisor to monitor an active call	For more information, refer to the Cisco
	Recording		silently. The supervisor cannot be heard by either	Unified Communications Manager Features
	(Cisco Unified IP		party on the call. The user may receive an audible	and Services Guide, “Monitoring and
			alert during a call when it is being monitored.	Recording” chapter.
	Phone 6911 only)
			When a call is secure, a lock icon is displayed.
			Callers may also receive an audible alert to
			indicate that the call is being monitored. The
			connected parties may also receive an audible alert
			that indicates the call is secure and is being
			monitored.
			When an active call is being monitored or
			recorded, you can receive or place intercom calls;
			however, if you place an intercom call, the active
			call is put on hold. This causes the recording
			session to terminate and the monitoring session to
			suspend. To resume the monitoring session, the
			person being monitored must resume the call.
	Speed Dialing		Dials a specified number that has been previously	For more information refer to:
	(Cisco Unified IP		stored.	• Cisco Unified Communications Manager
	Phone 6911 only)		You have to configure this feature on the Cisco	Administration Guide, “Cisco Unified IP
			Unified Communications Manager; the users use	Phone Configuration” chapter.
			the Feature key and the Feature Code to access	• Cisco Unified Communications Manager
			speed dial.
				System Guide, “Cisco Unified IP Phone”
				chapter.
		Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP)
	OL-23874-01				5-7