Cisco Systems ASA 5555-X, ASA 5505, ASA 5545-X Check the Add Automatic Translation Rules check box

Chapter 4 Configuring Network Object NAT (ASA 8.3 and Later)

Configuring Network Object NAT

Step 4 Check the Add Automatic Translation Rules check box.

Step 5 From the Type drop-down list, choose Dynamic. Choose Dynamic even if you are configuring dynamic PAT with a PAT pool.

Step 6 Configure either dynamic NAT, or dynamic PAT with a PAT pool:

•Dynamic NAT—To the right of the Translated Addr field, click the browse button and choose an existing network object or create a new object from the Browse Translated Addr dialog box.

Note The object or group cannot contain a subnet. The group cannot contain both IPv4 and IPv6 addresses; it must contain one type only.

•Dynamic PAT using a PAT pool—Enable a PAT pool:

Cisco ASA Series Firewall ASDM Configuration Guide

4-6