Choose Wizards Startup Wizard, 31-13 | Cisco Systems ASA 5545-X

Chapter 31 Configuring the ASA IPS Module

Configuring the ASA IPS module

(ASA 5510 and Higher) Configuring Basic Network Settings

In single context mode, you can use the Startup Wizard in ASDM to configure basic IPS network configuration. These settings are saved to the IPS configuration, not the ASA configuration.

In multiple context mode, session to the module from the ASA and configure basic settings using the setup command.

Note (ASA 5512-X through ASA 5555-X) If you do not see the IPS Basic Configuration screen in your wizard, then the IPS module is not running. See the “(ASA 5512-X through ASA 5555-X) Booting the Software Module” section on page 31-12, and then repeat this procedure after you install the module.

Detailed Steps—Single Mode

Step 1 Choose Wizards > Startup Wizard.

Step 2 Click Next to advance through the initial screens until you reach the IPS Basic Configuration screen. Step 3 In the Network Settings area, configure the following:

•IP Address—The management IP address. By default, the address is 192.168.1.2.

•Subnet Mask—The subnet mask for the management IP address.

•Gateway—The IP address of the upstream router. The IP address of the next hop router. See the “Connecting the ASA IPS Management Interface” section on page 31-8to understand the requirements for your network. The default setting of the ASA management IP address will not work.

•HTTP Proxy Server—(Optional) The HTTP proxy server address. You can use a proxy server to download global correlation updates and other information instead of downloading over the Internet.

•HTTP Proxy Port—(Optional) The HTTP proxy server port.

•DNS Primary—(Optional) The primary DNS server address. If you are using a DNS server, you must configure at least one DNS server and it must be reachable for global correlation updates to be successful.

For global correlation to function, you must have either a DNS server or an HTTP proxy server configured at all times. DNS resolution is supported only for accessing the global correlation update server.

Step 4 In the Management Access List area, enter an IP address and subnet mask for any hosts that are allowed to access the IPS management interface, and click Add. You can add multiple IP addresses.

Step 5 In the Cisco Account Password area, set the password for the username cisco and confirm it. The username cisco and this password are used for Telnet sessions from hosts specified by the management ACL and when accessing the IPS module from ASDM (Configuration > IPS). By default, the password is cisco.

Step 6 In the Network Participation area, which you use to have the IPS module participate in SensorBase data sharing, click Full, Partial, or Off.

Cisco ASA Series Firewall ASDM Configuration Guide

31-13

ASA Services Module, ASA 5555-X, ASA 5545-X, ASA 5585-X, ASA 5580 specifications

Cisco Systems has long been a leader in the field of network security, and its Adaptive Security Appliance (ASA) series is a testament to this expertise. Within the ASA lineup, models such as the ASA 5505, ASA 5580, ASA 5585-X, ASA 5545-X, and ASA 5555-X stand out for their unique features, capabilities, and technological advancements.

The Cisco ASA 5505 is designed for small businesses or branch offices. It provides essential security features such as firewall protection, flexible VPN capabilities, and intrusion prevention. The ASA 5505 supports a user-friendly interface, allowing for straightforward management. Its built-in threat detection and prevention tools provide a layered defense, and with scalability in mind, it can accommodate various expansion options as organizational needs grow.

Moving up the line, the ASA 5580 delivers greater throughput and advanced security features. This model is suited for medium to large enterprises that require robust protection against increasingly sophisticated threats. Its multi-core architecture allows it to manage high volumes of traffic seamlessly while maintaining excellent performance levels. The ASA 5580 also supports application-layer security and customizable access policies, making it highly adaptable to diverse security environments.

The ASA 5585-X further enhances Cisco's security offerings with advanced malware protection and extensive security intelligence capabilities. It incorporates next-generation firewall features, including context-aware security, and supports advanced threat detection technologies. This model is ideal for large enterprises or data centers that prioritize security while ensuring uninterrupted network performance and availability.

For enterprises requiring a balance of performance and security, the ASA 5545-X presents a compelling option. This model features scalable performance metrics, high availability, and integrated advanced threat protection. Coupled with advanced endpoint protection and detailed monitoring capabilities, the ASA 5545-X enables organizations to manage their security posture effectively.

Lastly, the ASA 5555-X blends cutting-edge technologies with strong security infrastructures. It boasts high throughput and the ability to execute deep packet inspections. Its sophisticated architecture supports threat intelligence feeds that provide real-time security updates, making it a powerful tool against modern threats.

Each of these Cisco ASA models brings specific advantages to varied environments. Their integrative capabilities enable businesses to enhance their security postures while benefiting from seamless scalability and management. As cybersecurity threats evolve, these advanced appliances play a vital role in protecting valuable digital assets.

Cisco Systems ASA 5545-X, ASA 5505 ASA 5510 and Higher Configuring Basic Network Settings, 31-13

Models: ASA Services Module ASA 5555-X ASA 5545-X ASA 5585-X ASA 5580 ASA 5505