SRB Configuration Examples

Autonomous Switching Example

The following example enables use of autonomous switching between two ciscoBus Token Ring interfaces in the same router. Frames entering Token Ring interfaces 0 or 1 will be autonomously switched to the other interface.

!global command to apply interface configuration commands to the ring group source-bridge ring-group 2

!commands that follow apply to interface token 0

interface tokenring 0

!enable srb between local ring 1, bridge 1, and target ring 2 source-bridge 1 1 2

!enable autonomous switching for interface token 0

source-bridge route-cache cbus

!

interface tokenring 1

!enable srb between local ring 2, bridge 1, and target ring 1 source-bridge 2 1 1

source-bridge route-cache cbus

BC-164Bridging and IBM Networking Configuration Guide

Page 56
Image 56
Cisco Systems BC-109 manual Autonomous Switching Example