Cisco Systems CGS 2520 manual Attaching Brackets for Etsi Racks

Chapter 2 Switch Installation

Installing the Switch

Figure 2-12 Attaching Brackets for ETSI Racks

1

2

Phillips flat-head screws 3 Power supply-side mounting position

Cable-side mounting position

Note For IP-30 compliance: If you use ETSI brackets, you can insert the rubber plugs in the same holes as shown in Figure 2-7or Figure 2-8before installing the brackets.

	Cisco CGS 2520 Hardware Installation Guide
2-14	OL-31444-01