Cisco Systems CGS 2520 manual Wall-Mounting

Contents

C H A P T E R 2	Switch Installation 2-1
	Warnings 2-1
	Installation Guidelines	2-3
	Verifying Switch Operation 2-3
	Installing the Switch	2-4

Mounting into a Rack	2-4
Mounting Brackets	2-4
Attaching Brackets for 19-Inch Racks			2-5
Attaching Brackets for 19-Inch Racks (IP-30 Compliance) 2-7
Attaching Brackets for 23-Inch Racks			2-12
Attaching Brackets for ETSI Racks		2-13
Mounting the Switch into a Rack		2-15
Wall-Mounting2-16
Attaching Brackets for Wall Mounting			2-16
Wall-Mounting (for IP-30 Compliance)			2-17
Installing and Removing SFP Modules 2-19
Installing SFP Modules	2-19
Removing SFP Modules	2-20

	Inserting and Removing the SFP Module Patch Cable					2-21
	Removing the SFP Module Patch Cable				2-22
	Replacing the SD Flash Memory Card			2-22
	Connecting Devices to the Ethernet Ports				2-24
	Connecting to the 10/100 and 10/100/1000 Ports					2-25
	Connecting to the 10/100 PoE+ Ports				2-25
	Where to Go Next 2-26
	Power Supply Installation
C H A P T E R 3		3-1
	Power Supply Modules 3-1
	Power Supply Module Installation 3-2
	Installation Guidelines	3-3
	Installing a Power Supply Module			3-3
	Equipment That You Need		3-3
	Grounding the Switch	3-4
	Installing the Power Supply Module in the Switch					3-6
	Wiring the Power Source		3-7
	Removing the Power Supply Module			3-11

Cisco CGS 2520 Hardware Installation Guide

iv OL-31444-01