Cisco Systems CGS 2520 manual Figure C-1 Connecting the Console Cable

Appendix C Configuring the Switch with the CLI Setup Program

Accessing the CLI Through the Console Port

Figure C-1 Connecting the Console Cable

1

2

1

1

			207536
RJ-45 console port	2	Console cable (RJ-45-to-DB-9 adapter cable)

Step 3 Configure the baud rate and character format of the PC or terminal to match the console port characteristics:

•9600 baud

•8 data bits

•1 stop bit

•No parity

•None (flow control)

Step 4 Connect power to the switch as described in the “Power Supply Module Installation” section on page 3-2.

Step 5 The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow the steps in the “Completing the Setup Program” section on page C-7.

Cisco CGS 2520 Hardware Installation Guide

C-2 OL-31444-01