2-15
Cisco CGS 2520 Hardware Installation Guide
OL-31444-01
Chapter 2 Switch Installation
Installing the Switch
Mounting the Switch into a Rack
After you attach the brackets onto the switch, use the four supplied number-12 Phillips machine screws
to attach the brackets to the rack as shown in Figure 2-13. (Brackets for the 19-inch rack shown in this
example.)
Note We recommend attaching the cable guide to prevent the cables from obscuring the LED panels on the
devices in the rack. Use the supplied black screw shown in Figure 2-13 [6] to attach the cable guide to
the left or right bracket.
Figure 2-13 Rack Mounting
1Mid-mount position 4Phillips machine screws
2Cable screw 5Power supply-side mounting position
3Cable-side mounting position 6Cable guide