7-11
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter7 Managing Network Res ources
Network Devices and AAA Clients
The first page of the Create Network Device process appears if you are creating a new network device.
The Network Device Properties page for the selected device appea rs if you are duplicating or editing a
network device.
Step3 Modify the fields as required. For field descriptions, see Configuring Network Device and AAA Clients,
page 7-11.
Step4 Click Submit.
Your new network device configuration is saved. The Network Devices page appears, with your new
network device configuration listed.
Related Topics
•Viewing and Performing Bulk Operations for Network Devices, page 7-6
•Configuring Network Device and AAA Clients, page 7-11
Configuring Network Device and AAA Clients
To display this page, choose Network Resources > Network Devices and AAA Clients, then click
Create.
Table7-4 Creating Network Devices and AAA Clients
Option Description
General
Name Name of the network device. If you are duplicating a network device, you must enter a unique name
as a minimum configuration; all other fields are optional.
Description Description of the network device.
Network Device Groups1
Location Click Select to display the Network Device Groups selection box. Click the radio button next to the
Location network device group you want to associate with the net work device.
See Creating, Duplicating, and Editing Network Device Groups, page 7-2 for information about
creating network device groups.
Device Type Click Select to display the Network Device Groups selection box. Click the radio button next to the
Device Type network device group you want to associate with the network device.
See Creating, Duplicating, and Editing Network Device Groups, page 7-2 for information about
creating network device groups.
IP Address
The IP addresses and subnet masks that are associated with the network device. Sel ect to enter a single IP address or to define
a range.
Single IP Address Choose to enter a single IP address. The IP address can be either IPv4 or IPv6. ACS 5.4 validates
the IP address if the address is entered in the supported form at. It displays an error message if the
entered format is not correct.
Note IPv6 addresses are supported only in TACACS+ protocols.