13-7
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter13 Managing Reports
Working with Catalog Reports
Step7 Click Save.
The report is saved in your Shared folder and is available for all users.
Note The shared reports that were created in older versions of ACS do not work after you upgrade an older
version of ACS to ACS 5.4 or install a fresh version of ACS 5.4. Therefore, you need to remove the
existing shared reports and add them in ACS 5.4.
Working with Catalog Reports
Catalog reports are system reports that are preconfigured in ACS. This section contains the following:
•Available Reports in the Catalog, page13-7
•Running Catalog Reports, page 13-11
•Deleting Catalog Reports, page 13-12
•Running Named Reports, page 13-13
•Changing Authorization and Disconnecting Active RADIUS Sessions, page 13-18
•Customizing Reports, page 13-19
•Restoring Reports, page 13-20

Available Reports in the Catalog

Table13-2 describes the reports available when you select Monitoring and Reports, launch Monitoring
and Report Viewer, then select Monitoring and Reports > Reports > Catalog.
Table13-2 Available ACS Reports
Report Name Description Logging Category
AAA Protocol
AAA diagnostics Provides AAA diagnostic details based on severity
for a selected time period.
Policy diagnostics, identity stores
diagnostics, authentication flow
diagnostics, RADIUS diagnostics,
TACACS+ diagnostics
Authentication Trend Provides RADIUS and TACACS+ authentication
summary information for a selected time period;
along with a graphical representation.
Passed authentications, failed attempts
RADIUS Accounting Provides user accounting information based on
RADIUS for a selected time period.
RADIUS accounting
RADIUS Authentication Provides RADIUS authentication details for a
selected time period.
Passed authentications, failed attempts
TACACS Accounting Provides user or command accounting information
for TACACS+ authentications for a selected time
period.
TACACS accounting