18-23
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter18 Managing System Ad ministration Configurations
Configuring Logs
Step4 Click Submit.
The remote log target configuration is saved. The Remote Log Targets page appears with the new remote
log target configuration.
Related Topic
•Deleting a Remote Log Target, page 18-23
Deleting a Remote Log Target
To delete a remote log target:
Step1 Select System Administration > Configuration > Log Configuration > Remote Log Targets.
The Remote Log Targets page appears, with a list of configured remote log targets.
Step2 Check one or more check boxes next to the remote log targets you want to delete.
Step3 Click Delete.
The following error message appears:
Are you sure you want to delete the selected item/items?
Step4 Click OK.
The Remote Log Targets page appears without the deleted remote log targets.
Related Topic
•Configuring Remote Log Targets, page 18-21
Facility Code Facility code. Valid options are:
•LOCAL0 (Code = 16)
•LOCAL1 (Code = 17)
•LOCAL2 (Code = 18)
•LOCAL3 (Code = 19)
•LOCAL4 (Code = 20)
•LOCAL5 (Code = 21)
•LOCAL6 (Code = 22; default)
•LOCAL7 (Code = 23)
This option is only visible if you click Use Advanced Syslog Options.
Maximum
Length
Maximum length of the remote log target messages. Valid options are from 200 to
1024. This option is only visible if you click Use Advanced Syslog Options.
Table18-19 Remote Log Targets Configuration Page (continued)
Option Description