9-14
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter9 Managing Policy Eleme nts
Managing Policy Conditions
Defining Name-Based Device Filters
You can create, duplicate, and edit the name of the network device that you want to permit or deny access
to. To do this:
Step1 From the Device Name tab, do one of the following:
Click Create.
Check the check box next to the name-based device filter that you want to duplicate, then click
Duplicate.
Check the check box next to the name-based device filter that you want to edit, then click Edit.
A dialog box appears.
Step2 Click Select to choose the network device that you want to filter.
Step3 Click OK.
Related Topics
Managing Network Conditions, page 9-6
Creating, Duplicating, and Editing Device Filters, page 9-12
Defining IP Address-Based Device Filters, page 9-13
Defining NDG-Based Device Filters, page9-14
Defining NDG-Based Device Filters
You can create, duplicate, and edit the name of the network device group type that you want to permit
or deny access to. To do this:
Step1 From the Network Device Group tab, do one of the following:
a. Click Create.
b. Check the check box next to the NDG-based device filter that you want to duplicate, then click
Duplicate.
c. Check the check box next to the NDG-based device filter that you want to edit, then click Edit.
A dialog box appears.
Step2 Click Select to choose the network device group type that you want to filter.
Step3 Click Select to choose the network device group value that you want to filter.
Step4 Click OK.
Related Topics
Managing Network Conditions, page 9-6
Creating, Duplicating, and Editing Device Filters, page 9-12
Defining IP Address-Based Device Filters, page 9-13
Defining Name-Based Device Filters, page 9-14