18-9
User Guide for Cisco Secure Access Control System 5.4
OL-26225-01
Chapter18 Managing System Ad ministration Configurations
Managing Dictionaries
Step4 Click Submit to save the subattribute.
Viewing RADIUS Vendor-Specific Subattributes
To view the attributes that are supported by a particular RADIUS vendor:
Step1 Choose System Administration > Configuration > Dictionaries > Protocols > RADIUS > RADIUS
VSA.
The RADIUS VSA page appears.
Step2 Check the check box next to the vendor whose attribute you want to view, then click Show Vendor
Attributes.
The vendor-specific attributes and the fields listed in Ta ble 18- 7 are displayed. You can create additional
VSAs, and duplicate or edit these attributes. For more information, see Creating, Duplicating, and
Editing RADIUS Vendor-Specific Subattributes, page 18-7.
ID-Value (Optional) For the Enumeration attribute type
only.
ID—Enter a number from 0 to 999.
Value—Enter a value for the ID.
Click Add to add this ID-Value pair to the
ID-Value table.
To edit, replace, and delete ID-Value pairs:
Select the ID-Value pair from the ID-Value
table.
Click Edit to edit the ID and Value fields.
Edit the fields as required.
Click Add to add a new entry after you
modify the fields.
Click Replace to replace the same entry with
different values.
Click Delete to delete the entry from the
ID-Value table.
Attribute Configuration
Add Policy Condition Check this check box to enter a policy condition
in which this subattribute will be used.
Policy Condition Display Name Enter the name of the policy condition that will
use this subattribute.
Table18-9 Creating, Duplicating, and Editing RADIUS Subattributes
Option Description