Chapter 3 Deploying and Discovering Objects
Deployment
Step 3 Enter the number of chassis objects you want to deploy.
Step 4 Click Forward.
A second Deployment Wizard – Object Parameters window appears.
Figure 3-14 Deployment Wizard—Object Parameters (2 of 2)
Step 5 Enter the following information:
•Chassis Name—Name (including prefix and suffix) for the chassis you are deploying. This chassis name must be unique within the generic object. A default prefix appears (for example, “C2611”) according to the chassis type selected for deployment. You can accept the default prefix or change this prefix, as desired. It is recommended that you modify the “0.0.0.0” suffix with the appropriate IP address of the router.
•IP Address—IP address for the chassis you are deploying.
•Subnet Mask—Bit mask used to identify which bits in the IP address correspond to the network address and subnet portions of the address.
•SNMP V2 Read Community—Community string used to retrieve attributes from the device using the SNMP V2 protocol.
•SNMP V2 Write Community—Community string used to set attributes from the device using the SNMP V2 protocol.
•User Name—Enter the user name for the device which, when combined with the passwords below, provides additional levels of security for accessing the device. If no user name exists on the device, leave this field blank.
•Login Password—Enter the telnet access password which protects the device from access by unauthorized personnel.
•Exec Password—Enter the access password for the chassis, enabling you to perform privileged operations on the chassis.
Cisco Access Router Manager User Guide
