Chapter 3 Deploying and Discovering Objects
Deployment
Figure 3-18 Deployment Wizard – Object Parameters (2 of 2)
Step 5 Enter the following information:
•Chassis Name—Name (including prefix and suffix) for the chassis you are deploying. This chassis name must be unique within the generic object. A default prefix appears (for example, “C2611”) according to the chassis type selected for deployment. You can accept the default prefix or change this prefix, as desired. It is recommended that you modify the “0.0.0.0” suffix with the appropriate IP address of the router.
•IP Address—IP address for the chassis you are deploying.
•Subnet Mask—Bit mask used to identify which bits in the IP address correspond to the network address and subnet portions of the address.
•SNMP V2 Read Community—Community string used to retrieve attributes from the device using the SNMP V2 protocol.
•SNMP V2 Write Community—Community string used to set attributes from the device using the SNMP V2 protocol.
Step 6 Click Forward.
If you are deploying more than one chassis, you are prompted to repeat Steps 5 and 6.
The Deployment Summary details appear in the Deployment Summary window.
Cisco Access Router Manager User Guide
