Cisco Systems SN 5428 1 2 3 4 5 6

Chapter1 Product Overview
Front-Panel LEDs
1-6
Cisco SN 5428 Storage Router Hardware Installation Guide
OL-4796-01
Each Fibre Channel port, FC 1 through FC 8, has two LEDs, labeled ACT and
LOG. The LEDs are located to the left of each Fibre Channel port.
Table 1 -1 describes the LED indications.
Figure1-4 SN5428 Front-Panel LEDs
1Gigabit Ethernet port, GE 1 410/100 Ethernet management port,
MGMT 10/100
2Gigabit Ethernet port, GE 2 510/100 Ethernet HA port,
HA 10/100
3FAULT, STATUS, and POWER 6Fibre Channel ports, FC 1 through
FC 8
Table1-1 LED Indication Descriptions
LED Color Description (when LED is on)
GE 1 and
GE 2 LEDs
LINK Green Port is operational.
TX Green Packets are being transmitted.
RX Green Packets are being received.
FAULT Red On if error condition in entire storage
router.
Flashing if error condition in a storage
router component.
STATUS Green On after successful boot up.
Flashing during boot up.
POWER Green Power is on.
CISCO STORAGE NETWORK 5428
STORAGE ROUTER
FIBRE CHANNEL 1Gb/2gB
GIGABIT ETHERNET
73983
1 2 3 4 5 6