Cisco Systems SRW224 manual PortBased VLAN Mode, Add a PortBased VLAN Group

24-port 10/100 + 2-Port Gigabit Switch with WebView

If you change from an 802.1q VLAN mode to a Port-based VLAN mode, this screen will appear.

PortBased VLAN Mode

The VLAN Group list will display the existing VLAN groups.To add a VLAN group, click Add New. To delete a group from the list, click Delete.

Click Apply to save the changes.

Add a PortBased VLAN Group

To add a PortBased VLAN group, enter an identifying number between 1 and 255 in the Group ID field. Select Member from the drop-down menu under the port for each port that you want to add. Click Apply to save the changes.

Chapter 5: Configuring the Switch through the Web Utility

Figure 5-13: Mode Change

Figure 5-14: Port Based VLAN

Figure 5-15: Add a Port Base VLAN Group

25

VLAN Tab