Chapter 2 Installing the Home Gateway

4Insert a standard RJ-11 telephone cable into the PHONE 1 port and connect the other end to an analog telephone, cordless phone base station, or fax machine. Note: To prevent an invalid connection to the circuit switched Telco network, do not connect an RJ-11 telephone cable from the PHONE 1 (or PHONE 2) port on the TES301 to the wall jack.

5(Optional) You can connect the PHONE 2 port to a second analog telephone or a fax machine.

6(Optional) Connect additional PCs, or other Ethernet devices, such as an IP set- top, to an ETHERNET port using a standard RJ-45 Ethernet cable.

16

4038767 Rev A

Page 36
Image 36
Cisco Systems TES301 manual Installing the Home Gateway