VoIP Settings

6Complete the Local Settings fields.

Note: Use the scroll bar to access all of the fields on this screen.

SIP Local Port—Enter the port used for incoming and outgoing call control signaling.

RTP Local Port—Enter the lowest value allowed for the port range to be used for incoming and outgoing RTP streams.

7Click Save Changes to save the information or Cancel to return to the dashboard.

Service

This tab allows you to configure call forward features for subscriber line 1 and 2 separately. Enter some commonly used numbers into speed dial entry list and enter the numbers you don't want to be disturbed into call block entry list, those 2 entry lists take effect on subscriber line 1 and 2 simultaneously.

Complete the following steps to configure the Service parameters for your VoIP settings.

1From the TES301 dashboard, click the Change Settings button located in the VoIP Settings cell.

4038767 Rev A

31

Page 51
Image 51
Cisco Systems TES301 manual Service