Connecting the Home Gateway

7Connect the included power adapter to the TES301 power port, and then plug the power adapter into an electrical outlet.

Note: The power adapter that shipped with your device may differ from the illustration below.

8Use the power switch on the back panel to power on the TES301. The power LED on the front panel will light up as soon as the device powers on. The LCD will light up with a message that the device is booting up.

9Once the device boots up, use the LCD menu to view the Internet status to verify that the gateway is connected to the Internet as follows:

a Wave your hand over the LCD.

b Tap the up or down arrows repeatedly until the Internet Status icon is highlighted.

4038767 Rev A

17

Page 37
Image 37
Cisco Systems TES301 manual Connecting the Home Gateway