Chapter 4 Troubleshooting the System
Troubleshooting Using Cable Flap Lists
Verify Cable Flap List Miss Threshold
To verify the cable flap list miss threshold, enter the show cable flap list command:
CMTS01# show cable flap list |
|
|
|
|
|
|
| ||
Mac Addr | CableIF | Ins | Hit | Miss | CRC | Flap | Time |
| |
0010.7b6b.5d1d C3/0 U0 | 0 | 688 | 169 | 0 | 0 | 3 | Nov 5 | 12:28:50 | |
0010.7b6b.5e15 C3/0 U0 | 1 | 707 | 185 | 0 | 0 | 5 | Nov 5 | 12:29:52 | |
0010.7b6b.5e27 C3/0 U0 | 1 | 707 | 198 | 0 | 0 | 5 | Nov 5 | 12:29:55 | |
0010.7b6b.5d29 C3/0 U0 | 1 | 709 | 205 | 0 | 0 | 5 | Nov 5 | 12:29:52 | |
0010.7b6b.5e2b C3/0 U0 | 1 | 710 | 204 | 0 | 0 | 7 | Nov 5 | 12:30:16 |
Set Cable Flap List Size
You can specify the maximum number of cable modems that can be listed in the cable flap list tables. The valid range is from 1 to 8192 cable modems. The default is 8192 cable modems.
To specify the maximum number of cable modems that can be recorded in the flap list, use the following command in global configuration mode.
Table
Command | Purpose |
|
|
CMTS01(config)# cable | Specify the maximum size of the flap list. |
|
|
Verify Cable Flap List Size
To verify the cable flap list size, enter the show cable flap list command:
CMTS01# show cable flap list |
|
|
|
|
|
|
| ||
Mac Addr | CableIF | Ins | Hit | Miss | CRC | Flap | Time |
| |
0010.7b6b.5d1d C3/0 U0 | 0 | 688 | 169 | 0 | 0 | 3 | Nov 5 | 12:28:50 | |
0010.7b6b.5e15 C3/0 U0 | 1 | 707 | 185 | 0 | 0 | 5 | Nov 5 | 12:29:52 | |
0010.7b6b.5e27 C3/0 U0 | 1 | 707 | 198 | 0 | 0 | 5 | Nov 5 | 12:29:55 | |
0010.7b6b.5d29 C3/0 U0 | 1 | 709 | 205 | 0 | 0 | 5 | Nov 5 | 12:29:52 | |
0010.7b6b.5e2b C3/0 U0 | 1 | 710 | 204 | 0 | 0 | 7 | Nov 5 | 12:30:16 |
Clear Cable Flap List
To remove a single cable modem from the flap list or to remove all cable modems from the flap list, use one of the following commands in global configuration mode.
Table
Command | Purpose |
|
|
CMTS01(config)# clear cable | Clear the entries in the cable flap list for the cable |
| modem with this MAC address. |
CMTS01(config)# clear cable | Clear the entries for all of the cable modems in the |
| flap list. |
|
|
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
|
| ||
|
|