4-33
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
78-5897-01
Chapter4 Troubleshooting the System Understanding Show Command Responses
See the following display for the counters of the SIDs connected to the specified interface:
router# show interface c3/0 sid counters
Sid Inpackets Inoctets Outpackets Outoctets Ratelimit Ratelimit
BWReqDrop DSPktDrop
1 40 16586 31 9160 0 0
2 0 0 0 0 0 0
3 0 0 0 0 0 0
See the following display for the counters of SID 1 on the specified interface:
router# show interface c3/0 sid 1 counters
Sid Inpackets Inoctets Outpackets Outoctets Ratelimit Ratelimit
BWReqDrop DSPktDrop
1 39 15964 30 8796 0 0
Table4-19 describes the fields shown in the output for the show interface cable sid displays.
Table4-19 show interface cable sid Command Field Descriptions
Field Description
Sid Service identification number
Prim Sid The primary service identifier assigned to the modem
Type Indicatesthis SID was created statically at the time of registration
or dynamically by the exchange of dynamic service messages
between the CM and CMTS
Online State “Online”means themodem owningthisSID isprocessing traffic.
“Offline” means the modem owning this SID is not processing
traffic
Admin Status “Disable”means thatthe SIDhas been turnedoff. “Enable”is the
normal state
QoS Quality of service.
Create time When the SID was created, number of seconds since the system
booted
Input octets (Inoctets) Number of octets received by using this SID
Input packets (Inpackets) Number of packets received by using this SID
Output octets (Outoctets) Number of octets sent from this SID
Output packets
(Outpackets) Number of packets sent from this SID
IP address IP address of the modem owning this SID
MAC address MAC address of the modem owning this SID
BW requests received Number of bandwidth requests received by this SID
Grants issued Number of bandwidth requests granted by this SID
Rate exceeded BW
request drops Number of bandwidth requests not granted by this SID