Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add | Local or Remote Network Li st
7-17
VPN 3000 Concentrator Series User Guide
Figure 7-8: Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Add | Local or
Remote Network List screen
List Name
The Manager supplies a default name that identifies the list as a LAN-to-LAN local or remote list, which
we recommend you keep. Otherwise, enter a unique name for thi s network list. Maximum 48 characters,
case-sensitive. Spaces are allowed.
If you use the Generate Local List feature on the Local Network List screen, edit this name after the system
generates the network list.
Network List
Enter the networks in this network list. Enter each network on a single line using the form at n.n.n.n/
w.w.w.w, where n.n.n.n is a network IP address and w.w.w.w is a wildcard mask.
Note: Enter a wildcard mask, which is the reverse of a subnet mask. A wildcard mask has 1s in bit positions to
ignore, 0s in bit positions to match. For example, 10.10.1.0/0 .0.0.255 = all 10.10.1.nnn
addresses.
If you omit the wildcard mask, the Manager supplies the default wildcard mask for the class of the
network address. For example, 192.168.12.0 is a Class C address, and default wildcard mask is
0.0.0.255.
You can enter a maximum of 200 networks in a single network list.