Cisco Systems VPN 3000 Severity to Email, Severity to Trap

Configuration | System | Events | Classes | Add or Modify
10-13
VPN 3000 Concentrator Series User Guide
Severity to Email
Click the drop-down menu button and select the range of event severity levels to send to recipients via
email. Choices are: None, 1, 1-2, 1-3. The default is None: no events are sent via email.
If you select any severity levels to email, you must also configure an SMTP server on the Configuration |
System | Events | SMTP Servers screen, and you must configure email recipients on the Configuration | System
| Events | Email Recipients screens. You should also configure the Email Source Addre ss on the Configuration
| System | Events | General screen.
Severity to Trap
Click the drop-down menu button and select the range of event severity levels to send to an SNMP
network management system. Event messages sent to SNMP systems are called “traps.” Choices are:
None, 1, 1-2, 1-3, 1-4, 1-5. The default is None: no events are sent as SNMP traps.
If you select any severity levels to send, you must also configure SNMP destination system parameters
on the Configuration | System | Events | Trap Destinations screens.
To configure “well-known” SNMP traps, see Table 10-3 under Severity to Trap for Configuration | System
| Events | General.
Add or Apply / Cancel
To add this event class to the list of those with special handling, click Add. Or to apply your changes to
this configured event class, click Apply. Both actions include your entry in the active configuration. The
Manager returns to the Configuration | System | Events | Classes screen. Any new event class appears in the
Configured Event Classes list.
Reminder: To save the active configuration and make it the boot configuration, click the Save Needed icon at the
top of the Manager window.
To discard your settings, click Cancel. The Manager returns to the Configuration | System | Events | Classes
screen.