Configuration | User Management | Users | Add or Modify
12-41
VPN 3000 Concentrator Series User Guide
Figure 12-15: Configuration | User Management | Users | Add or Modify screen, PPTP/L2TP tab
PPTP/L2TP Parameters tab
This tab lets you configure PPTP and L2TP parameters that apply to this user. During tunnel
establishment, the user client and server negotiate access and usage based on these parameters. Only
clients that meet these criteria are allowed access. If you checked PPTP, L2TP, or L2TP over IPSec under
Tunneling Protocols on the General Parameters tab, configure these parameters.
Value / Inherit?
On this tabbed section:
•The Inherit? check box refers to group parameters: Does this specific user inherit the given setting from
the group?
–Add screen = inherit base-group parameter setting.
–Modify screen = inherit assigned-group parameter setting, which can be the base group or a
configured group.
To inherit the group setting, check the box (default). To override the group setting, clear the box. If
you clear the check box, you must enter or change any corresponding Value field; do not leave the field
blank.
•The Value column thus shows either group parameter settings that also apply to this user (Inherit?
checked), or unique parameter settings configured for this user (Inherit? cleared). You cannot
configure a grayed-out parameter.