Cisco Systems VPN 3000 NAT | Rules | No Public Interfaces, Configuration | Policy Management | Traffic Management | NAT | Rules | Add or Modify

13 Policy Management
13-42 VPN 3000 Concentrator Series User Guide
Configuration | Policy Management | Traffic Management |
NAT | Rules | No Public Interfaces
The Manager displays this screen if you have not configured a public interface on the V PN Concentrator
and you try to add a NAT rule. The public interface need not be enabled, but it must be configured with
an IP address and the Public Interface parameter enabled.
You should designate only one VPN Concentrator interface as a public interface.
Figure 13-21: Configuration | Policy Management | Traffic Management | NAT | Rules | No Public
Interfaces screen
Click the highlighted link to configure the desired public interface. The M anager opens the appropriate
Configuration | Interfaces screen.
Configuration | Policy Management | Traffic Management |
NAT | Rules | Add or Modify
These screens let you:
Add: Configure and add a new NAT rule.
Modify: Modify a previously configured NAT rule.
You must configure a public interface on the VPN Concentrator before you can add a NAT rule. See the
Configuration | Interfaces screens.