Configuration | Policy Management | Traffic Management | NAT | Rules
13-41
VPN 3000 Concentrator Series User Guide
Figure 13-20: Configuration | Policy Management | Traffic Management | NAT | Rules screen
NAT Rules
The NAT Rules list shows NAT rules that have been configured. If no rules have been configured, the list
shows --Empty--. The format of each rule is: Private Address/
Subnet-Mask-1s on Interface (Action); for example, 10.0.0.0/
8 on Ethernet 2 (Public) (map TCP/UDP).
Add / Modify / Delete
To configure and add a new NAT rule to the list of configured rules, click Add. The Manager opens the
Configuration | Policy Management | Traffic Management | NAT | Rules | Add screen. If you have not configured
a public interface, the Manager displays the Configuration | Policy Management | Traffic Management | NAT |
Rules | No Public Interfaces screen.
To modify a configured NAT rule, select the rule from the NAT Rules list and click Modify. The Manager
opens the Configuration | Policy Management | Traffic Management | NAT | Rules | Modify screen.
To delete a configured NAT rule, select the rule from the NAT Rules list and click Delete. There is no
confirmation or undo. The Manager refreshes the screen and shows the remaining rules in the list.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click th e Save Needed icon at the top of the Manager
window.