Cisco Systems VPN 3000 Physical Address, Mapping Type, Action / Delete

Monitor | Statistics | MIB-II | ARP Table
15-95
VPN 3000 Concentrator Series User Guide
Interface
The VPN Concentrator network interface on which this ma pping applies:
1 = Ethernet 1 (Private) interface.
2 = Ethernet 2 (Public) interface.
3 = Ethernet 3 (External) interface.
8 or greater = WAN interface.
1000 and up = VPN tunnels, which are treated as logical interfaces.
Physical Address
The hardwired MAC (Medium Access Control) address of a physical network interface card, in 6-byte
hexadecimal notation, that maps to the IP Address. Exceptions are:
00 = a virtual address for a tunnel.
FF.FF.FF.FF.FF.FF = a network broadcast address.
IP Address
The IP address that maps to the Physical Address.
Mapping Type
The type of mapping:
Other = none of the following.
Invalid = an invalid mapping.
Dynamic = a learned mapping.
Static = a static mapping on the VPN Concentrator.
Action / Delete
To remove a dynamic, or learned, mapping from the table, click Delete. There is no confirmation or undo.
The Manager deletes the entry and refreshes the screen.
To delete an entry, you must have the administrator privilege to Modify Config under General Access Rights.
See Administration | Access Rights | Administrators.
You cannot delete static mappings.