Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN
7-9
VPN 3000 Concentrator Series User Guide
Figure 7-5: Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN screen
LAN-to-LAN Connection
The LAN-to-LAN Connection list shows connections that have been configured. The connections are listed
in the order you configure them, in the format: Name (Peer IP Address) on Interface; for
example, Branch 1 (192.168.34.56) on Ethernet 2 (Public). If no connections have been
configured, the list shows --Empty--.
Add / Modify / Delete
To configure and add a new connection, click Add. See the Configuration | System | Tunneling Protocols |
IPSec LAN-to-LAN | Add screen. If you have not configured a public interface, the Manager displays the
Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | No Public Interfaces screen.
To modify the parameters of a configured connection, select the connection from the list and click Modify.
See the Configuration | System | Tunneling Protocols | IPSec LAN-to-LAN | Modify screen.
To delete a configured connection, select the connection from the list and click Delete. There is no
confirmation or undo. The Manager deletes the connection, its LAN-to-LAN filter rules, SAs, and group.
The Manager then refreshes the screen and shows the remaining connections in the list.
Caution:Deleting a connection immediately deletes any tunnels—and user sessions—using that connection.
Reminder: The Manager immediately includes your changes in the active configuration. To save the active
configuration and make it the boot configuration, click th e Save Needed icon at the top of the Manager
window.