Cisco Systems WAVE594K9, 694 manual 2 Attaching Rear Rack Mount to the Rack

Chapter 3 Installing the WAVE-594 and WAVE-694

Rack Mounting and Cabling the WAVE-594 and WAVE-694

Step 4 Attach the rear mount bracket holders (item #3 in Table 3-1) to the rear rack posts using four appropriate rack screws (item #6 or #7 in Table 3-1). (see Figure 3-2)

Figure 3-2 Attaching Rear Rack Mount to the Rack

330142

Step 5 Insert the chassis between the mounting posts and secure (see Figure 3-3):

a.Insert the chassis into the rack with the rear rack mount holders sliding into the rear rack mount brackets.

b.Align the mounting holes in the front brackets with the mounting holes in the equipment rack.

c.Secure the chassis using four (two on each side) rack screws (item #6 or #7 in Table 3-1) through the holes in the front brackets and into the threaded holes in the mounting post.

Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide

3-4 OL-24619-02