Cisco Systems WAVE594K9, 694 manual Specification, Description

Appendix A WAVE-594 and WAVE-694 Hardware Specifications

Appliance Specifications

Table A-1 WAVE-594 and WAVE-694 Features and Specifications (continued)

Specification	Description
Dimensions	• Height: 42 mm (1.69 in)
	• Depth: 516 mm (20.33 in); includes power supply handles
	• Width: 429 mm (16.89 in)
Weight	Maximum Weight (no carton): 10.21 kg (22.51 lb)
	(Includes the weight of one Cisco Interface Module, one power supply,
	and two hard disk drives.)
Electrical Input	• Range Line Voltage: 90 to 132 VAC, 180 to 264 VAC
Requirements1	• Maximum Rated Input Current: 5 A - 2.5 A (100 - 240VAC)
	• Rated Input Frequency: 47 to 63 Hz
	• Maximum Real Input Power: 530W total (shared load when
		redundant
BTU Rating	1808 BTU/hr Maximum
Power supply output	• Rated steady-state power: 450 W (across input of 100 - 240 VAC)
	• Efficiency: Minimum of 85% at 100% electrical load
Acoustic noise2	•	Idle: 43.9 dBA
	• Operating (70% load): 46.9 dBA
Environment	•	Air temperature:

–Operating3: 0 to 40 °C (32 to 104 °F)

–Non-operating: –30 to 60 °C (–22 to 140 °F)

•Humidity:

–Operating: 10% to 90% RH (non-condensing)

–Nonoperating: 5% to 95% RH (non-condensing)

•Altitude:

–Operating: 3,050 m (10,000 ft)

–Nonoperating: 4572 m (15,000 ft)

1.Electrical input specifications apply at 23 ºC (73.4 ºF).

2.Levels are A-weighted sound pressures measured in a 23 ºC (73.4 ºF) ambient environment. Measurements were made per ISO 7779 (ECMA 74; ANSI S12.10) methods and are declared per ISO 9296 (ECMA 109).

3.All temperature ratings shown are for sea level to 1,000 meters (3,281 ft) with de-rating of maximum temperature for increase in altitude. If operating location is above 1,000 meters (3,281 feet), deduct 3 ºC (5.4 ºF) from the maximum operating temperature for each additional 1,000 meters (3,281 ft).

Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide

A-2 OL-24619-02