Cisco Systems 694, WAVE594K9 manual Using Power Protection Devices, Power Source Interruptions

Models: 694 WAVE594K9

1 84
Download 84 pages 30.33 Kb
Page 79
Image 79
Power Source Interruptions

Appendix B Maintaining the WAVE-594 and WAVE-694

Using Power Protection Devices

Power Source Interruptions

Systems are especially sensitive to variations in voltage supplied by the AC power source. Overvoltage, undervoltage, and transients (or spikes) can erase data from memory or even cause components to fail. To protect against these types of problems, power cables should always be properly grounded and one or both of the following methods should be used:

Use one of the power protection devices described in the “Using Power Protection Devices” section on page B-5.

Place the system on a dedicated power circuit (rather than sharing a circuit with other heavy electrical equipment). In general, do not allow the system to share a circuit with any of the following:

Copier machines

Air conditioners

Vacuum cleaners

Space heaters

Power tools

Teletype machines

Adding machines

Laser printers

Facsimile machines

Any other motorized equipment

Besides these appliances, the greatest threats to a system’s supply of power are surges or blackouts caused by electrical storms. Whenever possible, turn off the system and any peripherals and unplug them from their power sources during thunderstorms.

If a blackout occurs—even a temporary one—while the system is turned on, turn off the system immediately and disconnect it from the electrical outlet. Leaving the system on may cause problems when the power is restored; all other appliances left on in the area can create large voltage spikes that can damage the system.

Using Power Protection Devices

A number of devices are available that protect against power problems such as power surges, transients, and power failures. The following subsections describe some of these devices:

Surge Protectors, page B-6

Line Conditioners, page B-6

Uninterruptible Power Supplies, page B-6

Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide

 

OL-24619-02

B-5

 

Page 79
Image 79
Cisco Systems 694 Using Power Protection Devices, Power Source Interruptions, Uninterruptible Power Supplies, page B-6