Cisco Systems WAVE594K9, 694 manual Back Panel Components and LEDs, Color, State, Description

Chapter 1 Introducing the Cisco Wide Area Virtualization Engine 594 and 694

Hardware Features

Back Panel Components and LEDs

Figure 1-3shows the back panel components.

Note To monitor the boot process in normal operation, use a console port.

Figure 1-3 Back Panel Components

	1	2	3		4	5	6	7	8
1	Power supply 1			5	Fan 4
2	Power supply 0			6	Fan 3
3	Fan 6			7	Fan 2
4	Fan 5			8	Fan 1

Figure 1-4shows the back panel LEDs.

Figure 1-4	Back Panel LEDs
1	2	3	4	5	6	7	8

Table 1-2describes the back panel LEDs and their functions.

Table 1-2		Back Panel LEDs
LED			Color	State	Description
1, 2	Power supply status		—	Off	No AC power to all power supplies.
			Red	Blinking	No AC power to this power supply.
			Green	Blinking	AC power is present, only standby output on.
			Green	On	Power supply DC outputs on and OK.
			Red	On	Power supply failure. Refer to the
					“Troubleshooting the System Hardware”
					chapter for more information.

Cisco Wide Area Virtualization Engine 594 and 694 Hardware Installation Guide

1-4 OL-24619-02