2.6System Maintenance Mode
The printer enters the system maintenance mode when the Pause, Feed and Stop keys are pressed and held down simultaneously while turning the printer on.
If those keys are pressed further for five seconds after the printer has entered the system maintenance mode, the system will be reset and the settings in the backup memory will be reset to the following default values:
•
Baud rate: 9600 bps
Data length: 8 bits
•Print mode setting
Print mode:
•Optional function setting
Peeler: OFF
Cutter: OFF
Ejector: OFF
•Paper sensor type setting
Sensor: Transparent type (paper gap detection)
•Compatible model setting Native: ON
[Functions]
Set the
•Selects the mode when the Pause key is pressed.
•Selects the mode item when the Feed key is pressed.
•Stores the selected settings in the backup memory when the Stop key is pressed and the printer comes
Item | LCD indication |
↓ |
|
Baud rate | 9600bps → 19200bps →38400bps …… 4800bps → |
↓ |
|
Data length | 8 bits → 7 bits → |
↓ |
|
Native | NativeON→ NativeOF → |
↓ |
|
Voltage setting | PE∗.∗∗V → BL∗.∗∗V→ |
